Loading... Please wait...

 Custom Face Hole Props: Real person puts their face in the oval cutouts.

 Photo approval required before purchasing, send image to: almostrealstandups@gmail.com

Order custom life size cardboard cutouts with oval face hole cutouts for real people to put their face in. These props are generally left as a rectangle to hide the people who are standing behind. Please think about where the face holes will be in your project. The easel must run up the center of the prop, so no face holes can be in this area. If you put a face hole near the bottom, people will have to lay on the floor to use the face hole. If you put the face hole near the middle of the cutout, it will probably only be 2 or 3 feet from the floor and difficult to use. Smaller face hole props can be created and then set up on a table to get them to the proper height. If you are creating a custom graphic yourself please save it as an eps file as this will enlarge the best, save any digital or scanned photos as jpegs.

Tips for Digital Photos: We are looking for a high resolution image. One taken on a digital camera on the highest setting of 300, one downloaded from a smart phone at the largest pixel size, something around 2400 x 1200 pixels, the larger the photo the better (cell phones tend to put grain in photos when taken indoors.) Try to get on eye level with the subject of the photo. Don't shoot down as this will distort the image. Lighting is very important, low light will distort and add grain to the photo. Images taken off Facebook will not work as they have been compressed, screen shots will not work. Do not take a picture of a photograph, this will not work. jpeg format is great.

Tips for Scanning Photos: If you are scanning a photo, you will need to open the scanner program on your computer, this could be in your applications folder, or in your dock on your desktop. When it opens you should see an option for overview or preview, click on this and you should then see the photo. Grab your mouse and hold down the left side and pull a tight rectangle right on the people, not the whole photo, just the people, then look usually to your right and you should see options for the scanner, look for the dpi or resolution setting which is usually set on 72, change it to 600 (do not go larger or you will not be able to email it) then click scan. You can take your photo to a local printer or office supply store, make sure the store has a flat bed scanner, many office supply stores will try and scan your photo on a copy machine with a document scanner, this will be completely unusable.

When you get a scanned photo that you think will work or a digital file, open it on a computer and enlarge one of their faces to about the size of your open hand, this will give you a good idea how it would look printed. Then send the image in for review. Do not order without first getting photo approval,

Shipping to the contiguous United States Only. Hawaii, Puerto Rico, and any Military address is additional.

Contact us with any questions

Email: almostrealstandups@gmail.com • Phone: 480-508-1140  Mountain standard time

Click on the Green Buttons below to order

  • 4 foot Face Hole Cutout $120.00
  • 5 foot face hole cardboard cutout $155.00
  • 6 foot face hole cardboard cutout $164.00
  • 7 foot face hole Cardboard Cutout $184.00
  • 8 foot face hole Cardboard Cutout $195.00